You can find out how to level ground for a trampoline by using a measuring tape and a carpenter’s level. Then, remove the trampoline from the ground, measure the leg height, and cut the earth to the required depth. After the excavation is complete, use a carpenter’s square to check the ground. If there are any problems, hire a professional to do the work.
If the slope of your ground is less than 4 inches, you can still level the ground for your trampoline. However, if the slope is more than this, you must remove the excess earth and dig more dirt on the upslope side. Also, make sure that the frame is raised on the lower end so that it sticks out. It’s perfectly normal for the ground to have a slight incline, but more than two degrees of slope is not an issue.
After laying out the trampoline, you need to level the ground for it. You should do this by leveling the ground at least four inches higher than the ground underneath the trampoline. Remember to not dig too deeply, as this could cause unevenness on the other side. Then, you can add soil on the upslope side. If there is a slight slope on the other side, there is no problem.
After laying down the rubber feet, you need to grade the ground to make it level. This is similar to terracing, but you need to leave more space so that the trampoline edge doesn’t hit the graded area. You can also use leveling blocks to make the ground level. A leveled ground is much easier to level than an uneven one. The same tips apply for preparing a smaller-scale trampoline site.
A leveling kit is an essential part of preparing a playground for a trampoline. This tool helps to prevent uneven ground while jumping. Its adjustable feet can compensate for the slope of the ground. The leveling kit should be bought from a local hardware store. Ensure that the ground is level in all directions before you set the trampoline. It is best to use heavy gauge steel for this purpose.
If your trampoline will be on a slanted slope, you should make the ground even more level before installing it. The flat area should be larger than the size of the trampoline. It should be level enough that the edges of the trampoline don’t touch the slope at the edge. You need to make sure that the legs of the poles are set deep into the ground to prevent the legs from shifting or falling out.
After you have a level surface, you should mark the position of the trampoline on the ground. Generally, the trampoline needs to sit on level ground, so it must be level on both sides. If the ground is sloped, you must dig the ground down to make the area level for the trampoline. Afterwards, you must place the stakes on the flat side of the poles.
If the slope of your trampoline is less than seven inches, it is okay to install it. It is best to use a leveling kit to level the ground. You should also prepare the ground for trampoline installation by digging a trench on the uphill side and adding soil on the downhill side. In case of a sloping terrain, you should cut a terrace. Then, level the ground with a leveling kit and dig it into the ground.
In addition to a leveling kit, you can also invest in leveling blocks. These blocks can be easily placed on uneven ground. Just be sure to buy quality materials to make the ground level. A heavy gauge steel can be used for this purpose. After laying down the block, make sure that the ground is level in all directions. Afterward, you can begin to build the frame and secure it to it.